The Stamler Feeder Breaker provides a highly reliable means of production for continuous feeding and crushing of most layered and mined materials (including wet, dry, sticky or combinations thereof) with a wide range of configurations. The Stamler Feeder Breaker is the connection between the mining system and the material handling system, so that both systems can operate efficiently and in multiple places. The Stamler Feeder Breaker is located closer to the working face, the transportation distance and travel time are reduced, thus increasing the output and efficiency of the rest of the equipment.
Performance Advantage Analysis
The crusher is driven by double motors, which drive two gear rollers to rotate after deceleration by coupling and reducer. The gear rollers run smoothly and reliably at low speed.
The crusher adopts shear crushing technology to basically eliminate the phenomenon of over crushing.Small size, light weight,suitable for underground, workshop and open work crushing system of the first, second and third.
Intelligent: on-line test operation, lubrication system.
The embedded sensor is used to realize the functions of pre-judgment decision, alarm, monitoring of equipment operation status, stopping feeding, self-recovery and other functions before overload protection of equipment, as well as vibration measurement, bearing temperature measurement, speed measurement and other information.
The equipment adopts modular design, equipped with crushing tooth plate side comb plate, two tooth rollers can be exchanged between, improve the versatility of the equipment accessories, reduce the cost of daily maintenance.
The core part of the equipment, the bearing of the toothed roller shaft, adopts the large-clearance mine conversion bearing, imported bearing SKF manufacturer, special for mining machinery has strong vibration resistance and impact resistance, and is durable.Lubrication system adopts centralized automatic oil supply, low labor intensity, safe and reliable, convenient and fast.
Stamler Feeder Breaker has double overload protection, with stall protection device, intelligent control system and automatic lubrication system.
Uses and Features
The crusher by the motor power respectively after reducer reducer drive two teeth roll or violent backward rotation, when the material from the entrance into the body broken cavity, two with rotating teeth teeth roll material screening first, conform to the requirements of the material through teeth into the discharge chute, the big materials roller tooth tooth fracture, shear, tensile effect has been broken, from the discharging mouth education.
It is mainly used in coal preparation plant, open pit coal mine, well mining and other coarse, medium crushing operations, but also for limestone, oil shale, iron ore, gold ore, copper ore, lead and zinc ore, nickel ore and other rock ore materials, surface rock and soil of open pit mine, ore..
Coal Stamler Feeder Breaker:
Product name : Stamler Feeder Breaker
In put size 300—1500mm;
Out put size 150—500mm;
The Stamler Feeder Breaker Large capacity,Max capacity with 10000t/h,with high efficiency, reliable running;
Crushing tooth with spiral arrangement,lump rate more than 95%;
Processed Material:
* Underground coal, thermal coal, steam coal, calcium carbonate , kerogen shale, granite, lignite, dolomite, coking coal ,baking
coal, crozzling coal, bituminous coal, soft coal ,filter cake of slime, oil shale, hard coal, Indonesian coal, coal Indonesia,
anthracite coal, black coal, sulfur coal, etc.
* Rock phosphate, fluorspar, talcum, granite, dolomite, silica quartz, pebble,cobblestone, slag, basalt, feldspar etc.
* Limestone, gypsum ,calcium carbonate, high calcium stone, blue stone, etc.
* Wet and sticky material: Clay, bauxite, nickel ore, etc.
* Construction waste,building rubbish
