Henan Excellent Machinery Co., Ltd
+86-18337370596

Apron Feeder For Sale Structural Improvements In Limestone Crushing Systems

Jul 21, 2023

Reconstruction reason

The limestone crushing system is composed of a BZ2000×10000 heavy duty apron feeder for sale and a PF2018 single-stage hammer crusher, with a designed production capacity of 500t, but the actual production capacity is less than 400t, and the limestone crushing power consumption is high. After on-site observation, the limestone crushing system was reformed, and the output was increased to more than 460t/h, which achieved the purpose of technical reform.

I. Phenomena

(1) Through observation, it is found that the installation Angle of apron feeder for sale is large (23°), and the materials in the groove plate slip during operation, and the thickness of the material layer cannot meet the design requirements.

(2) Because the limestone is mainly transported into the plant by the surrounding small mines, due to the different particle size of the limestone into the plant at each mine, the soil impurities are large, and some mountain skins are mixed between individual mines, resulting in large fluctuations in the crushing machine.

(3) Due to the long operation time and low output of the crushing system, in order to ensure the production needs, the downtime and maintenance time is insufficient, and sometimes production is delayed due to maintenance.

apron feeder for sale

Ii. Transformation plan

(1)Apron feeder for sale mechanical part technical reform

In order to improve the thickness of the material layer and reduce the phenomenon of material sliding, weld a 80mm wide steel plate (vertical welding) at the end of the conveyor trough plate of the plate feeder, and weld one piece every three bins to improve the depth of the hopper for sale and increase the material carrying capacity of Apron feeder for sale. Increase the thickness of the material layer.

(2) Technical improvement of electrical parts of plate feeder

The plate feeder adjusts the feeding speed by frequency conversion. The inverter adopts Schneider series. The rated power of the inverter is 45kW and the rated frequency is 50Hz. After checking that the power of motor and reducer can meet the requirement of frequency raising, the set parameters of frequency converter are adjusted, the frequency of frequency converter is adjusted from the previous 50Hz to 60Hz, and the rated current of frequency converter is adjusted to the rated current of motor 94A.

(3) Alate feeder protection transformation.

After the parameter adjustment, the load test was carried out. According to the tested maximum load current, multiplied by a reliability factor 1.2, the inverter current protection value is further optimized. From the previous 94A, adjust to 63A, to ensure the reliability and sensitivity of the inverter protection action.

(4) Crusher protection transformation

In order to prevent the leakage in the crusher after the frequency converter speed increases, resulting in the triangle belt of the crusher slipping and burning accident, the belt stall protection device is installed at the belt pulley of the crusher. When the crusher pulley speed is low to 70% of the rated speed, directly jump the crusher and plate feeder.

(5) Change the feeding mode of the plate feeder

The feed of the original plate feeder is the tail feed, and it is changed into a double side feed, which is conducive to improving the thickness of the plate feeder.

Third, the effect of technical reform

After the above technical changes and 3 months of continuous, safe and smooth operation, apron feeder for sale has achieved good results. The energy consumption indicators have decreased significantly, the power consumption has been reduced from the original 2.5kWh/t to 1.8kWh/t, the output of the crushing machine has been increased from the original less than 400t/h to more than 500t/h, and the production capacity has been fully utilized.