Bucket Elevator System

Bucket Elevator System is a continuous conveying machine that uses a series of hoppers evenly fixed on the endless traction member to vertically lift materials. The bulk material is transported vertically inward and upward. It is divided into ring chain, plate chain and belt such as Vertical Bucket Elevator, Belt Bucket Elevator, Grain Belt Bucket Elevator, etc.
The hopper scoops up the material from the storage below, lifts it to the top with the conveyor belt or chain, turns around the top wheel and turns down, and the bucket elevator dumps the material into the receiving trough. The drive belt of the belt-driven bucket elevator generally adopts a rubber belt, which is installed on the lower or upper driving drum and the upper and lower redirecting drums. The chain-driven bucket elevator is generally equipped with two parallel transmission chains, with a pair of transmission sprockets on the top or bottom, and a pair of redirecting sprockets on the bottom or top. Bucket elevators are generally equipped with casings to prevent dust from flying in the bucket elevators.
Bucket elevator is suitable for lifting from low to high. After the supplied material is put into the hopper through the vibrating table, the machine automatically runs continuously and transports upwards. The conveying speed can be adjusted according to the conveying volume, and the lifting height can be selected as needed. The hopper is designed and manufactured by ourselves. The PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. Machine, computer measuring machine design, suitable for the lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products, can control the automatic stop and start of the machine through the signal recognition of the packaging machine.