Apron Feeder In Coal Handling Plant Conveying Part Of The Detailed Introduction
At present, the apron feeder in coal handling plant is composed of two sprockets and many chain pans. The upper supporting roller is located at the lower end of the ascending transmission chain and chain pan, and the lower supporting wheel is located at the bottom of the descending transmission chain and the end face of the chain pan.
The lower pallet structure is built-in type, it means the whole pallet set is placed inside the
frame frame. Due to the large angle of feeder design, when the material is piled up on it, the gravity of the carrying roller is increased, and the carrying roller is often buried by the ore powder, which eventually leads to the damage of the carrying roller and other parts. When the environment is harsh, dusty and humid, especially when receiving and unloading materials with high water content in the rainy season, the mud seeps into the rollers from the gap of the chain pan, destroying the lubrication of the bearings, causing the carriying rollers and bearings to break due to lack of oil.
In the maintenance work, because the apron feeder in coal handling plant pallets are built-in structure, the apron feeder in coal handling plant pallets are double-spoke pan type, and each end of its hub is connected to the hollow shaft cylinder as one, the damage to the pallets is difficult to find, and the maintenance personnel need to enter the feeder to dismantle the pallets.
We designed the apron feeder to overcome the above deficiencies and provide a material pan feeder conveying device that can avoid deformation of the chain plate under heavy load, eliminate equipment failure, facilitate maintenance, and increase its carrying capacity.
Apron feeder in coal handling plant is mainly composed of chain, active sprocket, driven sprocket, upper carrying roller and lower carrying roller. The said lower pallet is composed of shaft, end cover one mounted on the shaft in turn, roller, baffle, connecting pan, shaft protection sleeve, end cover two and ball bearing between shaft and roller; the lower pallet is connected with the support beam of the feeder. It can avoid the deformation of the chain pan under heavy load, eliminate equipment failure, facilitate maintenance, and increase its carrying capacity, and the use cycle is extended.
The above content is a brief introduction about the apron feeder in coal handling plant conveyor device knowledge, hope it can help you better understand.






