During the crushing process of hard materials, mineral sizers have a large structural design with obvious real-time effect and wide range of operation. However, due to hardness and material properties, the tooth rollers may be worn or broken after milling for a long time, which affects the grinding degree. Regular replacement management is required.
The purpose of this design is to provide a device for detecting roller wear in the mineral sizers rolling type. Here's how it works. It is used for mineral sizers rolling tooth roll wear detection device, including a crusher body. A distance structure is arranged at both ends of the roll including a bidirectional track device, a sliding module connected to the circular roller by a connecting frame. A sawtooth wear detection base block is arranged on the shaft body, and the control device is located at the track end. When in use, the circular roller is suspended on the upper end of the tooth roller to adjust its supporting height. When the machine is running empty, the wear degree of a single tooth roller is detected. If the damage degree is too large, the machine can stop and give corresponding tips. Used for mineral sizers rolling roller wear detection device. A number of tips mounted above the circular roller with different codes depending on the tooth spacing. Used in mineral sizers rolling roller wear detection unit, either by sound or LED light. Used in mineral sizers roll tooth wear detection device. The detection block in the same ring induces a cue device. Zers rolling roll wear detection device in mineral sizers. The round roll and roll operate in the opposite direction of rotation. The above type of wear detection device in mineral sizers is mounted above the frame in an independent mode. It can also warn the operator to change management, to ensure the stability of crushing quality.
Specific mode of implementation examples: It is used for mineral sizers rolling tooth roll wear detection device, including a crusher body. A distance structure is arranged at both ends of the tooth roll of the body including a bidirectional track device and a sliding module connected to the circular roller by a joint frame. A sawtooth wear detection base block is arranged on the shaft body, the control device is located at the end of the track. When in use, the circular roller is suspended on the upper end of the tooth roller to adjust its supporting height. When the machine is running empty, the wear degree of a single tooth roller is detected. If the damage degree is too large, the machine can stop and give corresponding tips. Used for mineral sizers rolling roller wear detection device. A number of tips mounted above the circular roller with different codes depending on the tooth spacing. Used in mineral sizers rolling roller wear detection unit, either by sound or LED light. Used in mineral sizers roll tooth wear detection device. The detection block in the same ring induces a cue device. Used for mineral sizers rolling roller wear detection device. The rotation direction of the circular roller and the roller is in reverse rolling operation.