generally, the heavy duty apron feeder is divided into three types: heavy type, medium type and light type, which are commonly used feeding equipment in concentrator. It is a continuous transport machine widely used in mining, metallurgy, building materials, ports, coal and chemical industrial and mining enterprises. It is mainly used for continuously and uniformly supplying and transporting various heavy objects and abrasive bulk materials from storage bin or hopper to crusher, batching device or transportation equipment. It is one of the important and indispensable equipments in the process of ore and raw material processing and continuous production. However, in the process of use, there is a situation that can't be restart with heavy load. This article will introduce the reasons and solutions.
Reason: As the materials are directly poured into the silo of the apron feeder, the front and rear forces of the plate feeder are different, which is manifested in the deformation of the supporting beam at the rear of the heavy duty apron feeder, even the shear of the steel plate connected to the slide rail, the deformation of the slide rail and the inability to start the plate feeder with heavy load.
The solution is as follows:
First, to reduce the impact of ore on the apron feeder, the traditional practice is to reduce the inclination angle of the rear wall of the silo through experiments according to the specific conditions of each unit. However, this practice will make the material slide down smoothly and adversely affect the production. In this way, in order not to affect the production on the one hand, but also to solve the impact problem on the other hand, the particle size of the ore fed into the silo can be limited. For example, it must be less than 800 mm, and the thickness of the rear of the plate feeder must also have certain requirements, such as more than 1 m; Secondly, the impact resistance of the plate feeder can be enhanced, which can be achieved by strengthening the support beam at the rear of the plate feeder and the impact resistance of the slide rail at the rear of the apron feeder. Thirdly, it can be improved by checking the starting capacity of the main motor of the board feeder. After general force analysis, the results show that the main reason why the board feeder can't start under heavy load is that the starting torque of the main motor of the board feeder doesn't match the load torque. Therefore, the main motor of the heavy duty apron feeder has been replaced, and the main motor of the apron feeder which is economical and can meet the requirements of heavy-load starting can be selected.






