Sealing belt conveyor covers is a kind of simple structure, low manufacturing cost, good sealing rain proof performance, and beautiful sealing belt conveyor covers. It includes a quarter globe cover, sealed rain sleeve and chassis. The sealed rain sleeve is connected with the chassis, and the quarter spherical cover is connected with the chassis on the top of the sealed rain sleeve. The utility model is applicable to the sealing and rainproof of the through-wall hole made in the installation project of the through-wall pipe or line.
The belt conveyor covers mainly includes the core anchor cup, from the inside to the outside of the anchoring channel steel pipe, steel or iron cover, rubber cover, anchoring channel steel pipe is provided with an anchoring plate at the end, the anchoring channel steel pipe and steel or iron cover contact is provided with a sealing rubber strip, sealant, The front end of the steel or iron cover is provided with polyurethane foam, non-dry sealing paste and sealing rubber strip. In the belt conveyor covers sealing link, increase the rubber belt conveyor covers, and the sealing structure form is optimized and improved, in order to further improve the performance of this link, and extend its service life.
Notes for maintenance of color steel belt conveyor covers:
① Color steel belt conveyor covers factory, in order to be suitable for packing, the main column and baffle disassembly lying, installation only need to be fixed with bolts
② Color steel belt conveyor covers debugging, please place the conveyor level, conveyor belt tension to the appropriate degree, generally in the middle of the belt hand lift belt from the drum about 200 mm is appropriate, after long-term operation, belt elongation, should be adjusted in time.
(3) After adjusting the post sewing machine seat to the appropriate position, only the handle can be locked.
(4) Lubricating oil should be added to the bevel gear box, and the gear can touch the oil. Oil should be cleaned once after 2000 hours.
The oil of the infinite transmission should be changed again after 50 hours of refueling operation, and the oil should be changed once every 1000 hours after use. Fill the grease nozzle at the top of the transmission once every 500 hours.
⑥ When the infinite transmission speed should be relaxed at the hand wheel indicating the body of the hex screw, and then turn the hand wheel to adjust the speed to the required speed, and then tighten the screw.
⑦ Maintenance and removal of the non-polar transmission, two friction wheel parts of the rotating surface are not allowed to hammer knock, so as not to affect the product dent turn
