The role of belt conveyor: In industrial production, belt conveyor can be used as a link between production, in order to achieve the continuity of production links and automation, improve productivity and reduce labor intensity, with the advantages of large conveying capacity, simple structure, easy maintenance, standardization of components,etc.
Belt conveyor is mainly composed of frame, conveyor belt, belt roller, tension device, transmission device, etc. The body of the conveyor is made of high quality steel plate, and the frame is formed by the height difference between the front and rear legs. The flat is sloped at a certain angle. The frame is equipped with belt rollers and rollers to drive and support the conveying belt. There are two kinds of ways: Slow down motor driven and electric roller driven. As one of the final components of the belt conveyor, the belt conveyor covers has a very important role and is installed as follows.
Weld the Z-type rectangular tube on the top and side of the frame, and install the belt conveyor covers from one end of the frame to the other. Use self-tapping nails to fix the belt conveyor covers on the Z-type rectangular tube at least 4 fixing points per piece. Installation lap 1 or 2 ripple, the effective size of 880mm or 820mm, Install 1 piece of open cover every 10 pieces easy to maintenance or check.
The characteristics of the belt conveyor covers are introduced as follows:
1、The belt conveyor covers has special insulating cardboard plus special cloth, coolant resistant, oil resistant, abrasive foam and iron filings, and is formed in one time by high frequency heat lamination with German technology, this type of cover has the characteristics of not being afraid of foot stepping, hard object ramming without transformation, long life, good sealing and light running.
2、The belt conveyor covers has long stroke, small compression, and the rate of length is 1:10. This is the most advanced form of folding cover, which can make up for the problems that other covers cannot solve.
3、Belt conveyor covers flexible organ type guide guard design parameters guard structure material length after stretching fabric:nylon leather or three anti cloth,etc., can be customized length after compression support: PVC one piece per frame, stroke length connection plate: resin plate, iron plate shield total width matching machine tool model shield internal width guide height shield internal height.
Belt conveyor covers shield is divided into two types: fixed shield and open and closed shield, both made of galvanized corrugated steel or color coated steel. When ordering, it must be specified that there are generally 7 fixed covers and 1 open or close cover for every 8 covers, or two covers can be arranged alternately. When installing, press the open or close cover cover on the left and right two adjacent fixed covers, the overlap length is one or two wave distances. Note that the hinged side of the open or close cover is placed on the non-passing or infrequent pedestrian side of the conveyor, while the latching side is placed on the passing or frequent pedestrian side.
