1. The fixed conveyor should be installed on a fixed foundation according to the prescribed installation method. Before the mobile conveyor is put into operation, the wheels should be wedged with triangle wood or braked. In order to avoid walking during work, when there are multiple conveyors operating in parallel, there should be a one-meter passage between the machine and the machine and between the machine and the wall.
2. Before using the conveyor, check whether the running parts, tape buckles and load-bearing devices are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate level before starting.
3. The belt conveyor should be started without load. Feed in after normal operation. It is forbidden to drive after feeding.
4. When there are several conveyors running in series, they should start from the discharge end and start sequentially. Feeding can only be done after everything is in normal operation.
5. When the tape deviation occurs during operation, stop and adjust, and do not use it reluctantly to avoid abrasion of the edges and increase the load.
6. The working environment and the temperature of the delivered materials shall not be higher than 50°C and lower than -10°C.
7. Pedestrians or passengers are prohibited on the conveyor belt.
8. The feeding must be stopped before stopping, and the belt can be stopped only when the material on the belt is exhausted.
9. The conveyor motor must be well insulated. Do not pull and drag the cables of mobile conveyors. The motor must be grounded reliably.
10. When the belt is slipping, it is strictly prohibited to pull the belt by hand to avoid accidents.
