A belt conveyor covers installed over a microphone to protect it from rain and to allow for long-range electrostatic exciter calibration during long-term noise outdoor monitoring.
Alias of belt conveyor covers:
belt conveyor covers is also known as conveyor cover, color steel conveyor cover, conveyor cover, conveyor dust cover, belt conveyor cover, etc. belt conveyor covers plays a great role in goods and environment, when goods in the process of transportation can reduce the loss and waste of goods, make the conveyor belt in the process of transportation more safe and reliable, followed by extending the service life of the conveyor.
Application industry of belt conveyor covers.
The belt conveyor covers is widely used in power plants, cement plants, steel plants, chemical plants, coal plants, ports, docks, mining enterprises, etc.
The role of belt conveyor covers:
The belt conveyor covers plays a great role in goods and environment, when the goods in the process of transportation can reduce the loss and waste of goods, make the conveyor belt in the process of transportation more safe and reliable, followed by extending the service life of the transporter.
Style of belt conveyor covers:
The belt conveyor covers has fixed type, open type and with observation window type, which can clearly see whether the goods in the process of transmission and the conveyor belt is running normally, and there is also a runaway cover, which plays the role of rainproof and dustproof for the conveyor with runaway switch.
The main colors of the belt conveyor covers are sea blue, white and gray, red, etc.
The main procedures of belt conveyor covers:
The production of belt conveyor covers requires several procedures to complete, including plate selection, loading, pressing, shearing, arcing, height adjustment, packaging, etc.
belt conveyor covers installation and precautions as a fixed belt conveyor covers skeleton is connecting angle steel or Z-beam, whose length is equal to the belt conveyor covers installation length. Weld the connecting angles or Z-beams to the channel or small angles on both sides of the conveyor frame. If you need to install the support angle, first weld the support angle on both sides of the frame, and then weld the connecting angle or Z-beam on the support angle.
Among the four forms of belt conveyor cover, fixed belt conveyor covers and open/close belt conveyor covers are made of galvanized corrugated steel plate or color coated steel plate, generally 9 fixed belt conveyor covers and 1 open/close belt conveyor covers are set up in every 10 covers, or two belt conveyor covers can be arranged alternately. When installing, press the open/closed hood on the two adjacent fixed belt conveyor covers on the left and right, and the overlapping length is one wave distance or two wave distances. Note that the hinged side of the open/closed belt conveyor covers is placed on the non-passing side of the conveyor, while the latching side is placed on the passing side of the conveyor.
Use self-tapping nails to fix the belt conveyor covers on the connecting angle or Z-beam, with no less than 4 fixing points per piece.
The folding point cover is only used at the folding point of the convex arc section of the conveyor, while the runout switch belt conveyor covers is designed to cover the runout switch. Both types are covered with fixed covers.
Every 10 pieces can also be installed with 1 piece of observation typebelt conveyor covers for easy maintenance and viewing.
