Henan Excellent Machinery Co., Ltd
+86-18337370596

Analysis Of Flow Field And Dust Concentration Field Of Double-Layer Belt Conveyor Covers

Mar 16, 2023

In order to determine the optimal height of double-layer belt conveyor covers to prevent dust leakage and pollution in 17m/s strong crosswind environment, based on the theory of gas-solid two-phase flow, using lunt software respectively under the condition of strong crosswind, The distribution of flow field and dust concentration field in rain cover of double belt conveyor is simulated numerically. The calculation results show that strong crosswind will strengthen the flow vortex formed between the double belts, which may lead to fly ash blowing. When the crosswind speed is 17/s, the vortex strength will not be too large, and fly ash will not be blown out of the hood. When there is a cross wind, there will be a very high velocity wind (up to 55/s) at the top of the rain hood. The force caused by strong wind impact must be considered in the strength design of the wind hood. When there is crosswind, the maximum dust concentration in the rainproof hood occurs at the junction of coal belt and coal pile, followed by the junction of fly ash belt and fly ash pile. When the crosswind speed is 17/s, the dust concentration in the outer space of the rainproof hood is less than 4×10-kg/m, which meets the requirements of Coal Mine Safety Regulations.

belt conveyor covers

Belt conveyor is a common material conveying equipment, widely used in sand transportation, material drying and coal or fly ash transportation. The belt conveyor is mostly a single belt, conveying only one kind of material, and the transport of two kinds of materials of the double layer belt machine, that is, the upper and lower two layers of belt reverse conveyor, is not common. The double-layer belt conveyor covers studied in this paper is a new type of belt conveyor, its interior has two layers of belt, the upper layer carries coal, the lower layer carries fly ash, the two reverse transport, can solve the coal and fly ash transport between the coal plant and coal plant. The double-layer belt conveyor will transport coal to the hangkou power plant, at the same time will fly ash back to fill the coal pit, make full use of the belt conveyor return route, not only save energy, but also save space, is a very ideal transport equipment. However, the design of double-layer belt conveyor is different from that of single-layer, especially the design of its rain cover needs to be reconsidered.

Because the vertical height of the double layer belt conveyor is relatively high, if the reference to the design size of the single layer belt conveyor covers, the rain cover is designed to be relatively high, and the size of the vertical side of the rain cover is larger, will consume more steel. Therefore, it is necessary to optimize the design of double-layer belt conveyor covers, especially to increase the height of the side from the ground, reduce the size of the rain cover, so as to reduce the consumption of materials when making. With the advancement of environmental governance, the dust concentration in coal mining and other fields is required. According to the provisions of the "Coal mine Safety Regulations", the average allowable concentration of the total dust in coal mining sites is required to be less than 4×106kg/m3. If the two sides of the rainproof hood of the double-layer belt conveyor are shortened in the design, when the strong cross wind is encountered, the dust in the rainproof hood may be blown out by the wind, which will bring harm to the surrounding environment. Therefore, it is necessary to study the distribution, flow and diffusion of dust in the double-layer belt conveyor covers under crosswind conditions, so as to provide reference for the optimal design of rain cover.