Henan Excellent Machinery Co., Ltd
+86-18337370596

Apron Feeder For Sale Chain Plate Adhesive Solution

Apr 01, 2023

Apron Feeder For Sale is a continuous feeder for bulk materials (such as coal and ore). Because of its huge supply capacity and long layout distance, it can bear the direct influence of large and fast materials and stable performance, so it has been widely used in port, mining and other industries. However, in actual project engineering, the uncertainty of use often leads to the spread of the chain plate sticking, as happened with our Apron Feeder For Sale in the Philippines.

Heavy duty plate Feeder is widely used in mining, gold treatment, building materials and coal industries, this machine is mainly used in the silo and funnel under the specific silo pressure, continuous short distance conveying a variety of large materials, not only For processing coarse particles, but also for fine materials. Suitable for crushing, screening and transportation equipment, especially for primary crushing. Heavy work can be completed in harsh environment, highly adaptable to material particle size composition, temperature, viscosity, material changes (such as frost, rain, snow or ice), and supply is uniform, accurate and reliable, the machine can be installed horizontally or diagonally, the maximum tilt Angle of upward transport is 23 degrees.

apron feeder for sale

The power of the motor is used to drive the sprocket shaft, which rotates through the coupling and reducer, and the sprocket engages with the chain pin through the sprocket teeth, and drags the chain plate For continuous straight motion. Chain plate by the support wheel and attached to the frame supporting wheel support, and adjust the tension device to make the chain properly meshing on the sprocket, so as to complete the purpose of material transfer, and heavy plate machine mainly by the driving device, chain plate device, tension device, frame, support wheel and support sprocket, spindle device, the following is the characteristics of several structural device analysis,

2.1 The driving device is composed of motor, coupling, DC reducer, planetary gear, reducer, torque rod, locking disc, etc. The device is a floating point with DC shaft fulcrum, and the compact disc connecting the two has no-foundation suspension, lightweight and large transmission ratio. By using the fulcrum floating-point type, additional bending moments due to installation errors are reduced, the life of the drive shaft is extended, and it is easy to remove and assemble.

2.2 The tensioning device is a screw tensioning mechanism, which is mainly composed of two supporting rollers. Both ends of the two supporting rollers are composed of rolling bearings, bearing seats, compound springs and tensioning screws. The supporting rollers are fixed on the shaft through expansion sleeves. At each end of the shaft are two rows of radial core spherical roller bearings and bearing seats, which are mounted on both sides of the frame and slide back and forth between the rails, tensioning devices are used to adjust the horizontal position of the chain, and supports are used as guides and supports for the chain plate to ensure proper chain tensioning and smooth movement. By adjusting the tension screws, the tension between the two chains will be even. If the chain plate is suddenly impacted by the material, the compound spring will prevent it. Protect the chain plate and other components from damage.

2.3 Apron Feeder For Sale chain plate device Chain plate device is composed of groove plate, chain link and other parts. The groove plate is single-arc lap joint welding with low alloy steel plate, high strength, wear resistance and no leakage. For the link type, the bulldozer track chain (tank chain) made by a specialized manufacturer was chosen, which has small pitch error, smooth movement, high strength, high tension and no lubrication.

This is an I-shaped structure formed by welding steel plates. There are many reinforcement plates welded between the upper and lower flange plates. The two I-beams are composed of many channel steel.

2.5 heavy wheel includes bearing, rolling bearing, shaft, roller, sealing ring and gland and other components, mainly used to support the operating parts of the chain, and prevent the chain plate due to the load and weight of the greater interference, the normal operation of the chain can withstand the influence of some materials and bin pressure, and even can limit the deviation of the chain.

2.6 Supporting sprocket The supporting sprocket consists of bearing, rolling bearing, shaft, roller, sealing diagram, gland and other components, which mainly support the empty chain plate and prevent the weight of the chain plate from causing heavy empty chain plate and affecting normal operation.

2.7 Main shaft device Main shaft device is composed of shaft, bearing box, sprocket, supporting wheel, bearing seat, etc. Two sprockets mounted on the shaft drag the chain plate and move continuously to achieve the purpose of transportation and supply. The feature of the device is that the sprocket and the support wheel are connected through the expansion sleeve, the main shaft is set on the output shaft of the reducer, its simple disassembly and maintenance are very convenient

3.Apron Feeder For Sale chain plate adhesive reference solution

Some of Venezuela's ore export ports are supplied by dump trains. First of all, the ore is unloaded by dump trains and goes into the dump hopper. The Apron Feeder For Sale is installed under the dump hopper. The Apron Feeder For Sale sends the material downstream to a belt conveyor where the ship returns to the sea via a belt conveyor system. Because the material it provides has a relatively low water content (about 3%), the Apron Feeder For Sale is located in a valley and therefore has a granite geology. Civil construction is difficult and costly. So a regular Apron Feeder For Sale was used to save on civil and construction costs.