Henan Excellent Machinery Co., Ltd
+86-18337370596

Apron Feeder For Sale Principle And Fault Analysis Of Hydraulic Drive System (2)

May 19, 2023

Apron feeder for saleHydraulic system pressure is usually due to the hydraulic pump can not output suitable pressure caused. The reasons for insufficient system pressure are as follows: (1) oil pump damage. Oil pump damage causes the output pressure to be lower than the requirements, its main reasons are parts wear, pump shaft is not positive, pump leakage and so on. (2) The return oil line is blocked. A blocked return line prevents oil from flowing back to the tank, and pressure builds up in the system. (3) Pressure regulating valve failure. The failure of pressure regulating valve is also one of the main reasons leading to insufficient system pressure. Hydraulic system overload often leads to system breakdown, machine shutdown and other serious consequences. The reasons for hydraulic system overload are as follows:

apron feeder for sale

(1) Or the operation load becomes heavier. When the apro feeder for sale is running, the operating load suddenly becomes heavy, resulting in a substantial rise in pressure, which leads to pressure overload. (2) Load imbalance. When the machine is running on the construction site, the load on some parts may increase suddenly due to different working conditions, resulting in a sudden rise in pressure. (3) insufficient pump capacity. Pump output is less than the requirements, will also lead to system overload. The heating of hydraulic system is usually due to the energy loss of oil during operation, which causes the temperature rise of the system. The reasons for the heating of the hydraulic system are as follows: (1) the efficiency of the pump decreases. When the efficiency of the pump decreases, the oil requires more energy to reach the desired pressure, resulting in an increase in the temperature of the oil.

(2) Work with heavy load for a long time. The apron feeder for slae tends to heat up under heavy work for a long time. Methods to solve the failure of the hydraulic system: 1. Check the overall condition of the hydraulic system in time, repair and replace the problems found in time. 2. Timely replacement of hydraulic oil, to ensure that the oil within the effective period, and in accordance with the requirements for oil injection control. 3. Strictly follow the equipment maintenance plan, and carry out necessary maintenance and maintenance after each operation of apron feeder for sale. 4. Select high quality hydraulic system parts and accessories to ensure the quality of the system. 5. Clean and maintain the hydraulic system frequently. Through the above points, we can better solve the common failure of hydraulic transmission system, improve the working efficiency and service life of the machine.