Feeder breaker is a kind of primary crushing equipment specially used for coal crushing in large leaky coal mines. Because of its large appearance size, large processing capacity, strong adaptability and other advantages, it is widely used in mining, coal mining and other industries.
All parts of feeder breaker produced by our company are manufactured in strict accordance with $09001 and national standards, and the entire link of procurement, processing, assembly and workshop test is strictly supervised and controlled by the company's internal quality control department.
1. The quality of raw materials in strict accordance with is09001 and national standards for testing.
2. Welding and non-destructive friction testing (magnetic particle detection, ultrasonic detection, appearance detection) in accordance with jb/t5000-2007 standards.
3. In the production process, each process will be in accordance with is09001 and jb/t5000.1-2007 standards for strict dimensional inspection of the parts.
4. The heat treatment process of processed parts is carried out in strict accordance with national standards.
5. Sandblasting operation and surface treatment process are carried out according to gb8923-1988 standard.
6, Workshop test and adjustment in accordance with jb/t4042-1999 standard. 7. on-site installation and commissioning are carried out strictly according to enterprise standards.
8, All parts in the entire production process are tracked and inspected by our internal quality control department personnel.
9. All parts are cut and drilled by laser cutting machine.
10, All parts of the sandblasting and spraying primer in strict accordance with jb/t5000.12-2007 requirements.
11. All key stress components are connected with high-strength bolts and ring slot rivets.
12. The final finish coating is strictly in accordance with jb/t5000.12-2007 and enterprise standards.
Before assembly, all parts are surfacing sandblasted to grade 2.5 (metallic color) and coated with 75 micron epoxy anti-rust primer. After assembly, the whole machine completes the painting process according to the requirements. The equipment is tested in the workshop and adjusted accordingly to ensure a longer trouble-free life. Each equipment is assembled in the workshop, and it runs for 24 hours without load. Various technical indicators are tested by microcomputer detection system.
A, Feeder breaker need to use noise detection equipment to detect noise.
B. Use flaw detector to detect welded joints and steel components.
C, Use the spring meter to detect the spring stiffness, elasticity, etc. The infrared temperature measuring device is used to test the temperature of the transmission part, and the temperature rise is below 40° for qualified products. To ensure that each device can operate safely and efficiently.
The above quality inspection process is the product quality test that must be carried out in each link of the production of feeder breaker. We always adhere to the purpose of customer first, product quality first, and produce qualified products for customers. In the production process, we must carry out quality inspection on the products produced in each process. The inspection methods include operator self-inspection, automatic inspection, process tour inspection and final inspection. At the same time, the process inspection should be self-inspection, mutual inspection and special inspection. To ensure that our feeder breaker does not have any quality problems, for you to relieve worries.






