It is important to know how to install the center sizer according to the factory instruction. The later maintenance can also timely find the problems encountered in the operation of the machinery, reduce the downtime for maintenance and provide a guarantee for the smooth operation of the center sizer.
1.The installation of center sizer
a.Center sizer pump with vibration work unit, all fasteners should be fastened during installation and before the testing,they also should be regular inspection and fasten at any time during operation.
b.During installation, it should be noted that the rotation of the machine is irreversible.
c.Since the discharge port of the crusher is at the bottom, the installation height and how to cooperate with the feeding and discharging devices should be considered in the system design.
2. The maintenance of the center sizer
a.Routine inspection should be made frequently in the operation process of center sizer. When abnormal sound is found or the bearing temperature is higher than 700C, it should be stopped immediately for inspection and can continue to start up after the fault is eliminated in time.
b.Feeding can be done after normal operation of the machine. Feeding should be uniform and hard materials should be prevented from being mixed with iron. Feeding must be stopped before stopping the machine, and the power will be cut off after the material is broken in the machine.
c.Should often check whether the seal of the bearing seat is good, the grease in the bearing seat should be filled once a month, every three months should be all cleaned for oil and replacement of linoleum.
d.Check fasteners frequently for looseness
e.In order to ensure the safety of operators and equipment, repair, adjustment and cleaning are prohibited during the operation of the machine.
f.When the particle size of the broken product is too large, it should be stopped to check the wear of the tooth roller to prevent the tooth roller from being worn out.
In a word,the regular and accurate production, the timeliness of maintenance and the planning and arrangement of the management are the key to the stable and long-term efficient production of the center sizer. We should also grasp the details and pay more attention to these small problems in the usual use process.
