Z type bucket elevator,which is a kind of lifting and conveying equipment that drives the bucket through the chain to convey the lifting materials, let us look at its maintenance skills:
1.Before using, it need to check the lubrication point of each part, which to maintain sufficient lubricant, smooth lubrication of rotating parts.When starting to run under zero load, it need to airlift 2-3 minutes before feeding the z type bucket elevator. It should be noted that before each shutdown to clean up the remaining materials in the hopper, there should be no residual material, clean up after the shutdown. Do not reverse the traction mechanism, so as not to occur traction belt derailment failure.
2.To ensure the uniformity feeding , it should not more or less, and can not exceed the rated conveying capacity of the elevator. If too much material is likely to cause the bucket load bearing too much off. The material accumulation and other phenomena, too little material is likely to lead to material unloading is not clean, repeated lifting, increasing the machine energy consumption.
3.In the first use or repair after 100 hours of operation, it need to re-check the machine, tighten all the bolts and joints, check the wear and tear of the components, lubricating grease filling, such as parts have serious wear and tear, etc., To be replaced in a timely manner, and the machine again debugging, has reached the best use of the effect.
4.Maintenance and upkeep should be carried out regularly, and the z type bucket elevator should be overhauled regularly according to the specific use and working environment, and the corresponding records should be made. Bolts found loose or fall off at the bolt connection, traction belt, hopper wear or fall off damage to tighten or replace new parts in time, so as not to affect the normal use of the machine and efficient production.
