The sizers crusher is also known as roller crusher, Double Roll Mineral Sizers, etc. The Double Roll Mineral Sizers Crusher is mainly used for medium and fine crushing of soft and hard ores. Also, its equipment structure is a simple, less excessive crushing phenomenon, and the roller surface tooth shape, size, and arrangement can be changed with material properties. This paper introduces the structure and optimization of the sizers crusher.
1. The Structure Of Double roll mineral Sizers Crusher
The double roll mineral sizers crusher is mainly composed of roller, roller support bearing, compression adjustment device, and driving device. The driving mechanism is composed of two motors, and the motor is driven by the triangle belt pulley, dragging the drum, and reverse rotation. When crushing the material, the material enters the drum from the feed port, and the crushed finished product is discharged from the bottom of the chassis through rolling crushing. In addition, when the double roll mineral sizers crushes the material, the material from the feed goes through the roller, through rolling crushing, and then crushed finished products from the bottom of the chassis are discharged.

2. Optimization And Improvement
1. The power input shaft of the double roll Mineral sizers crusher is connected with the power source transmission through the tooth coupling, hydraulic coupling and hard tooth surface reducer
2. The two ends of the roller shaft of the double roll Mineral sizers are respectively extended out of the crushing chamber and connected with the rolling bearing installed in the bearing seat of the base.
3. Under the premise of inhering strong crushing force, the improved double roll Mineral sizers can prevent the broken materials in the crushing chamber from entering the supporting bearing chamber, greatly reduce the maintenance amount and operation cost, and improve the reliability of the double roll Mineral sizers crusher.
A wedge or gasket adjusting device is arranged between the two rollers of the double roll Mineral sizers, and an adjusting bolt is arranged at the top of the wedge device. When the adjusting bolt pulls the wedge block, the wedge will push the movable roller away from the fixed wheel, that is, the gap between the two rollers becomes larger, and the particle size of the material becomes larger. When the wedge falls, under the action of the compression spring, the gap between the two rollers becomes smaller, and the particle size of the discharge becomes smaller.
3. The Price Of A double roll Mineral sizers
The crushing roller of double roll Mineral sizers is easy to wear, and the cost of maintenance and replacement in production is very high. Therefore, our company surfaces hard alloy on its surface, so that its wear resistance, heat resistance, corrosion resistance, can significantly improve the service life of the crushing roller, saving maintenance costs.





