Henan Excellent Machinery Co., Ltd
+86-18337370596

What Is The Trajectory Of The Material In The Compost Trommel Screen

Mar 29, 2023

Compost trommel screen is one of the main machinery of organic compost sorting. It mainly uses the rotary movement of the cylinder with the cutter inside and the sieve of the cylinder to break the bag of organic compost and grade it. The compost trommel screen's bag-breaking function relies on an internal bag-breaking tool of appropriate length. Screening function mainly depends on the cylinder screen surface, the screen surface is generally composed of woven mesh or perforated thin plate and frame, the inclined installation, the organic compost is screened with the rotating movement of the cylinder spiral, the particle size of the material is screened out, larger than the sieve hole to stay on the screen until discharged from the tail of the cylinder. In order to provide theoretical basis for the structural design of compost trommel screen, this paper focuses on the motion law of materials in compost trommel screen and the optimal theoretical control parameters.

1. Motion analysis of materials in the rolling screen

1.1 Movement path of materials The movement process of materials in the rolling sieve is complicated because the rolling sieve cylinder is installed at an inclined Angle and rotates around its axis. Take a unit P in the material layer, and its motion in the compost trommel screen is shown in Figure 1. After entering the compost trommel screen, the unit P is lifted to 0 point by the rotating cylinder, at which point it is removed from the screen surface for parabolic motion. When it reaches the highest point, D, it falls back to the screen surface, B, and so on until it drains the compost trommel screen. The motion of the element P in the compost trommel screen can be decomposed into plane motion in the x0y plane and straight motion along the z axis. The dropping motion of the material in the 0y plane can be decomposed into two parts: the circular motion part and the parabola motion part of the material along with the screen body; The linear motion along the z axis is caused by the inclined installation of the screen body. In addition, the material in the process of the above movement, and there may be sliding between the screen body. In the study of compost trommel screen material movement law, made the following assumptions: (1) the material along the cylinder rotation along the axis of the cylinder for spiral screening motion, temporarily do not consider the internal tool on the material movement process; (2) do not consider the mutual interference between materials.

1.1.1 The motion of unit P in xoy plane and the motion of analysis unit P in x0y plane are shown in Fig.2 IV. The motion process is divided into two parts: circular motion from point B to point 0, and parabolic motion from point 0 to point D and then to point B. The specific equation of motion is as follows:

compost trommel screen

According to equations (1) and (2), it is not difficult to find that the coordinates of the intersection of two curves of any circle and parabola are the origin 0(0,0) and (4rsin2 xcos a,-4 rsin acos2a), respectively. If r=R(R is the radius of compost trommel screen), that is, the material is located at the inner wall of the screen body, the intersection of the two curves are (0,0) and (4Rsin2 xcos q,-4 Rsinacos2a). In order to obtain a higher screening efficiency, the material should be made to make a large turnover in the screen body, so that the material can obtain the maximum drop in the screen body, that is, the maximum required in Figure 2 (yoy). By taking the derivative of equation (2) with respect to x, we obtain:

According to the above calculation, when α=35.264, the (yo-ys) value is the largest, and the material is the most fully turned in the compost trommel screen. 1.1.2 Movement and Analysis of element P along the z axis Assuming that element P does not slide axially in the sieve body, the movement of element P along the z axis is intermittent. As can be seen from Figure 1, when unit P completes a cycle, it moves BB along the z axis and displaces. Therefore, the time required for unit P to complete each cycle and the displacement of movement can be calculated first, and then the average velocity of unit P along: axis can be calculated. (1) The time for unit P to complete a cycle includes the time for circular motion along the compost trommel screen and the time for parabolic motion 2. If it is assumed that there is no slip between the element P and the cylinder, the time of circular motion along the compost trommel screen can be calculated from the speed of Angle oOB and the speed of the simplified. From the coordinates of point B we can calculate: Angle 00, B=4a, then 6=2 n From the equation of parabolic motion and the coordinates of point B, we can get the parabolic motion time of element P: 2= 120sina cosa, where n 9 n is the rotational speed of compost trommel screen. Thus, the time for cell P to complete each cycle tt+t2o(2) Cell P to complete each cycle moves BB length along the z axis of the compost trommel screen. According to the motion equation and movement time of element P, the displacement of element P after completing a cycle can be obtained: 1=4Rsin acos atan0. Therefore, the average motion velocity of element P along the z axis v=.