The existing track gear position adjusting device used on apron feeder for sale generally loosens the track by adjusting the position of the gear shaft, but in the actual operation process, due to the larger force required, adjustment is extremely inconvenient. Meanwhile, the existing one supports the shaft by one end of the bolt and adjusts by adjusting the bolt. When in use, Bolts may become loose, leading to the loosening of the track, which requires frequent adjustment, bringing inconvenience to the work, but also reducing the work efficiency.
The technical problem to be solved by the utility model is to overcome the defect of the prior art and provide a track gear position adjusting device used on the apron feeder for sale. The following technical solutions are adopted to solve the technical problems of the new model. The track gear position adjustment device mainly includes a slide rail composed of two fixed plates, and a skateboard is arranged between the two fixed plates. The skateboard is used to fix the position of the gear shaft. One end of the lower skateboard is provided with a vertical plate, and a bolt is arranged on the vertical plate. Used to control the movement of the skateboard, which is characterized in that the fixed plate is provided with a sawtooth, and the corresponding skateboard is provided with a sawtooth, the upper fixed plate is provided with a vertical long hole, the vertical long hole is provided with a screw. Serrations are set only at the lower end of the upper fixed plate. Two sets of vertical long holes are arranged, which are located on the left and right sides of the upper fixed plate. The structure is simple, convenient and practical, using the combination of sawteeth, to ensure the stability of the adjusting device, to solve the problem of track loosening caused by the loosening of the adjusting device, at the same time, the upper fixed plate can be adjusted, when the need to move the skateboard, adjust the upper fixed plate, so that the upper fixed plate and the skateboard are separated, easy to pull the skateboard, after adjustment, the upper fixed plate and the skateboard sawteeth, simple use, The structure is stable.
In order to make the apron feeder for sale technical means, creation features, objectives and efficacy of the utility model easy to understand, the utility model is further elaborated in combination with specific drawings below. The track gear position adjustment device mainly includes sliding rail composed of upper and lower two fixed plates 1, between the two fixed plates is provided with a skateboard 2, the skateboard is used to fix the position of the gear shaft, one end of the lower skateboard is provided with a vertical plate 3, the vertical plate is provided with a bolt 4, one end of the bolt is on the skateboard. Used to control the skateboard forward and backward movement, the fixed plate is provided with a sawtooth 5, and the corresponding skateboard is provided with a sawtooth on the fixed plate is consistent with the sawtooth on the fixed plate, the upper fixed plate is provided with a vertical long hole 6, the vertical long hole is provided with a screw.
The serrations are only arranged on the lower end of the upper fixed plate. Two sets of vertical long holes are arranged in total, which are respectively located on the left and right sides of the upper fixed plate. The above shows and describes the basic principle, main characteristics and advantages of the utility model. The technical personnel of the trade should understand that the utility model is not restricted by the above embodiments, and that what is described in the above embodiments and instructions only illustrates the principle of the utility model. On the premise of not deviating from the spirit and scope of the utility model, the apron feeder for sale will be various changes and improvements, and these changes and improvements fall within the scope of the required protection. Requirements for scope of protection requirements and their equivalents.
