Sidewall belt conveyor driver should be familiar with the post sidewall belt conveyor working principle, structure, performance, technical characteristics, the name and role of parts, motor, control equipment performance and related electrical basic knowledge. At the same time, the driver should also keep in mind the safety regulations of the operation, this article will make a detailed explanation of the safety provisions:
1. It is strictly prohibited to drink wine and do nothing unrelated to the job before work and in class. Strictly implement shift transfer system and post responsibility system of this type of work, and abide by the relevant provisions of this operation procedure and coal Mine Safety Regulation.
2. It is forbidden to flush water to the inside of the pulley and belt to prevent the belt from slipping.
3. No one is allowed to stand, walk, sit, lie or cross on the conveyor belt of the sidewall belt conveyor.
4. Up and down the corridor must hold the handrail tightly,it is strictly prohibited to walk in the corridor during equipment operation.
5. It is forbidden to use the sidewall belt conveyor to carry tools or other objects. In the operation process of the sidewall belt conveyor, it is forbidden to clean or replace the spoke, to clean the frame, roll, the inner side of the guard belt to store coal, and to stand on the frame to shovel coal, sweep water and touch the conveyor belt.
6. It is forbidden to use the scraping and rolling method to adjust deviation in operation. It is forbidden to scatter coal, sand, mat bags and other sundry things to adjust the running deviation.
7. After the belt is pressed by materials, it should not be started frequently. It should be started after the power failure by unloading part of the load, and overload starting is prohibited.
8. Sanitary cleaning in the corridor of sidewall belt conveyor should be in the nose or tail operation, if you need to clean up in the middle of the corridor must pay attention to safety.
9. When the equipment is running, the tail driver of the sidewall belt conveyor must be in the range of 5 meters beyond the corridor protection net in addition to the coal cleaning operation.
