Those who have done equipment procurement may have experienced something like this: After comparing countless brands and negotiating numerous price rounds, the equipment finally arrived. But as soon as it was powered on, it "failed to adapt" - either it got clogged, or there was severe wear and tear, or it couldn't be installed properly due to insufficient installation space. Eventually, this not only increased the procurement and operation maintenance costs but also affected the production schedule.
Are you confused about where exactly the problem lies in this situation? The answer is that you probably messed up the selection sequence.
When choosing Tubular Drag Conveyors, you only need to first clarify the process requirements, then select a customizable manufacturer, and finally discuss the brand and price. What you really need to care about are the key dimensions such as material characteristics (particle size, density, humidity, corrosiveness, flammability and explosiveness), conveying distance, conveying capacity, installation environment (temperature, explosion-proof, workshop layout), etc. By the way, prioritize modular design and models equipped with intelligent tensioning systems. The reasons will be elaborated later. Remember this sentence and keep reading.
Tubular Drag Conveyors Material Characteristics
The first basis for selection is always the material itself. It directly determines the choice of pipe material and model. This step cannot be bypassed and cannot be rushed. What you need to focus on confirming are the following points:
- Physical Particle Size: Powdered or granular? Powdered materials are recommended to choose a dense structure with a disc spacing of ≤ 150mm, while granular materials need to ensure that the outer diameter of the disc and the pipe gap are ≤5mm.
- Density And Humidity: Density affects power and chain speed; materials with high humidity and high viscosity may require additional pre-treatment with ordinary equipment.
- Flammability, Explosiveness And Corrosiveness: Corrosive materials require 316L stainless steel pipes, and food-grade materials should choose FDA-certified UHMW-PE discs.
Tubular Drag Conveyors Capacity
If you don't want the equipment to be overloaded frequently and waste money, then the capacity must be calculated precisely using the formula.
Capacity calculation formula: Q = 3600 × v × A × ψ
- Q: Transport volume (t/h)
- v: Chain speed (m/s)
- A: Pipe cross-sectional area (m²)
- ψ: Filling coefficient, generally ranging from 0.3 to 0.6
Tubular Drag Conveyors Recommended Configuration
|
Conveying Capacity |
Recommended Configuration |
|
<5 t/h |
DN100 pipe + 0.2 m/s chain speed |
|
5–20 t/h |
DN150 pipe + 0.3 m/s chain speed |
|
>20 t/h |
DN200 pipe + 0.4 m/s chain speed |
Tubular Drag Conveyor Layout Evaluation
The greatest engineering advantage of tubular drag conveyors is that they can be freely arranged in three-dimensional space - horizontally, at an angle, vertically, in any combination. They can even make 360-degree turns freely without being restricted by the site.
- Horizontal Conveying Distance:Maximum approximately 100m
- Vertical Lifting Height: Maximum approximately 60m.
- Curvature Radius During Three-Dimensional Turning:≥ 8 times the pipe diameter.
- Temperature:For high-temperature workshops, heat dissipation design needs to be considered.
- Explosion-Proof Requirements:In the chemical and powder-related industries, explosion-proof design is a mandatory requirement.
- Workshop Layout:In narrow spaces and for cross-floor renovations, this is precisely one of the advantages of EXCT Tubular Chain Conveyors.
Tubular Drag Conveyors Key Component Selection
There is a saying in the industry: "When choosing components, you get what you pay for." If you make the right choice, it will save you a lot of trouble and money in the long run; but if you make the wrong choice, the maintenance costs later will exceed your imagination.
|
Component |
Selection Key Points |
Recommended Solution |
|
Drive Unit |
The combination of variable frequency motor and SEW reducer, with a 15% reserve of power |
7.5kW motor is compatible with DN150/30m horizontal transportation |
|
Chain System |
Mine-grade alloy steel chain (with breaking force ≥ 80kN) combined with self-lubricating bearings |
Pitch 125mm double-row chain is suitable for medium to long distances |
|
Sealing System |
Nitrogen protection interface (for explosion-proof environments) + magnetic mechanical seal |
The food industry adopts CIP cleaning interface |
Tubular Drag Conveyors Specific Conditions
If your materials or environment fall into the following three situations, general equipment is likely to encounter problems and must be customized by an experienced manufacturer.
High-Temperature Environment
- Install heat dissipation fins on the pipes and use heat-resistant steel for the chains (maximum 350℃).
- Install a thermal expansion compensator every 20m
Explosion-Proof Requirements
- Whole machine ATEX certified, drive motor IP65 protection + grounding device.
- Configure inert gas filling system (oxygen content < 8%).
- Can adopt ring pipe sealing structure and select a conductive device to effectively prevent static electricity from causing an explosion
Sticky Materials
- Use Teflon-coated discs and set a mechanical scraper cleaning device.
- Set the conveying angle to ≥ 45° to prevent material backflow.
Tubular Drag Conveyors Economic Assessment
The biggest pitfall in procurement is focusing only on the "initial price" while ignoring the "total life cycle cost". Let's do a practical calculation.
Cost Comparison
- Screw conveyor: Approximately $11,100 - $20,800 per unit (length < 30m)
- Tubular Drag Chain Conveyor: Approximately $3,000 - $55,600 per unit (30% lower total life cycle cost)
Maintenance Costs
- Component replacement: Chains/plates are replaced approximately every 3 years (about 15% of the equipment price)
- Energy advantage: Energy consumption is 50-80% lower than pneumatic conveying systems
The selection of tubular drag conveyors is not a simple arithmetic problem. It requires a comprehensive judgment based on the material characteristics of your site, the layout of the workshop, and the production line rhythm.
If you are struggling with the selection, please let us know your operating conditions:
- What kind of material are you transporting? (particle size, humidity, flammability, explosiveness)
- What is the approximate hourly transportation volume?
- Is the site horizontal, vertical, or requires turning across floors?
Our engineers will provide a one-on-one free selection assessment and customized solution based on your actual process, instead of asking you to use a pre-made configuration table. We always believe that every tubular drag conveyor sold by EXCT delivers a long-term production guarantee.
From the early stage of material testing, scheme design, equipment production and manufacturing, to the mid-stage installation and commissioning, personnel training, and the later stage of spare parts supply and after-sales response, we provide full-service throughout, so that you can be worry-free and at ease.






