Inclined screen can be classified in many different ways, for example, straight screen, round screen, and high frequency screen depending on movement trajectory. No matter which Inclined screen is inclined, how can we solve the problem of slow discharge if purchased? Don't worry about this.
Inclined screen is a inclined screen machine that uses shaker or vibrating motor to drive the screen surface for high frequency vibration, so it is inclined screen with high precision and high efficiency.
Inclined screen is Inclined screen with slow discharge or no discharge, which is believed to be encountered by most Inclined screen users. Therefore, the first feeling among users is that the fault is caused by the Inclined screen manufacturer, which is definitely not properly designed. However, in fact, This phenomenon is very common and easy to solve, because the root cause of these problems is Inclined screen vibration source - vibration motor.
It is not difficult to find the root cause of the Inclined screens slow discharge, which is to adjust the two heavy hammers at the upper and lower ends of the vibration motor. There are two ways to start:
1. Increase the weight of two Inclined hammers: Increasing the weight of eccentric block can increase the vibration force of the whole machine. Users can increase the weight of Inclined screen according to the number of Inclined screen layers and different material weights, so that both inclined screen and materials can achieve the best expected result.
2. Change the Angle between the upper and lower weights: If the incline Angle of the weight is changed, the trajectory and stay time of the material on the inclined screen will change accordingly. The larger the incline Angle, the smaller the biased force will be generated, the longer the material stays on the screen, the more fine the screening will be, therefore, the slower the discharge speed will be. Conversely, the smaller the incline Angle, the larger the biased force will be. The residence time of the material will be shorter, and the corresponding discharge speed will be accelerated. This adjustment mode is more suitable for coarse drying and screening of large particles of material. Therefore, the user should be based on the nature of the screening of the material, to moderately adjust the Angle of the two weights, so that the distribution of materials, processing capacity, through the network rate can achieve the best screening state.
In the production and design of the inclined screen of the same model, all the Settings are certain, and the adjustment methods are different depending on the characteristics of the materials. Users can adjust the Angle of the weight according to their own requirements, so as to make the Inclined screen work in the best condition.
