Over the years, I've interacted with countless users in the grain industry and found that they have long relied on traditional conveying equipment, with belt conveyors being the most widely used.
In my view, its low cost and low grain breakage rate make it the preferred choice for grain depots and processing enterprises, which is undeniable.
Besides Drag Chain Conveyor, Screw Conveyors and Bucket Elevators also play important roles in grain transportation and are familiar "old partners."
However, with the grain industry's scaling up and intelligent upgrading, I've clearly felt the limitations of traditional equipment becoming increasingly apparent.
Problems such as large footprint, low flexibility in conveying paths, difficulty in controlling grain breakage rates, and cumbersome transfer processes are no longer suitable for the high-efficiency, energy-saving, and low-loss requirements of modern grain transportation. This is the core concern many users have expressed when consulting me.
As a marketing expert with years of experience in the Corrugated Sidewall Belt Conveyors field, I've discovered an important trend: this equipment, with its unique structural advantages, has enormous application potential in the grain industry.
It has the potential to solve the pain points of traditional conveying equipment, becoming a new and preferred choice for upgrading grain transportation, and it's the model I've been strongly recommending to grain industry users in recent years.

Working Principle & Structure Of Corrugated Sidewall Belt Conveyors
Corrugated Sidewall Belt Conveyors replace ordinary conveyor belts with Corrugated Sidewall Belts. Their working principle and composition are basically the same as those of ordinary belt conveyors, as shown in the figure. The conveyor belt of this type uses the conveyor belt of an ordinary belt conveyor as the base belt. Wave-shaped guard edges are attached to both sides of it, and cleats are bonded to the base belt at certain intervals between the two wave-shaped guard edges. Corrugated Sidewall Belt Conveyors can achieve variable angle arrangements in the vertical plane. Besides the horizontal type and the straight inclined type, they can also be arranged in L-shaped and Z-shaped forms, with the maximum inclination angle reaching 90°.

Key Points For Adaptability In The Grain Industry
Stable bearing: The enclosed bearing unit can reduce the friction and impact between the grain and the equipment, effectively lowering the grain breakage rate. This is the most concerned aspect for users in the grain industry.
Flexible path: Strong ability for variable angles and curved transportation, capable of adapting to space-constrained scenarios such as grain depots and ports, reducing transfer links, minimizing grain loss, and simultaneously enhancing transportation efficiency.
Controllable loss: Without the digging force during bucket elevator feeding and the throwing impact during unloading, the grain loss is much lower than that of traditional equipment. This can help users reduce waste and improve economic benefits.
Corrugated Side-wall Belt Conveyors Vs Traditional Conveying Equipment Advantages
► They can achieve large inclination transportation. Compared with horizontal or vertical transportation, they shorten the overall length of the machine, reduce the occupied area, and save equipment investment and construction costs.
► The conveying capacity is large. Due to the corrugated edge of the conveyor belt, the loading cross-sectional area increases. Under the same belt width and speed conditions, the conveying capacity is 1 to 2 times higher than that of ordinary belt conveyors.
► Grain loss is small. Because they can vertically lift the materials, they can replace Bucket Elevators and do not have the digging force during feeding and the impact of throwing during unloading.
Based on these characteristics, Corrugated Sidewall Belt Conveyors can play a unique role in bulk material transportation. However, for single-level or vertical transportation, the cost of corrugated sidewall belt conveyors is usually much higher than that of Air Supported Belt Conveyor or bucket elevator. Therefore, the typical application scenarios of corrugated sidewall belt conveyors in the grain industry are:
- Space is subject to certain limitations
For instance, in the dry grain receiving area of some grain depots, the horizontal and vertical transportation of bulk grain through the unloading pit, the under-belt conveyor, bucket elevator and cleaning screen is approximately ten to fifteen meters. In such cases, using corrugated side-wall belt conveyors makes the process smoother, the civil structure simpler, reduces grain transfer, and is easier to maintain and manage.
- Special control is required for the material breakage rate.
Rice and fine corn are more prone to breakage or cracking under mechanical force. An increase in the breakage rate leads to a decline in the quality of the grain and is not conducive to storage. Using large-angle or vertical corrugated sidewall belt conveyors for handling in the silo is an effective way to control the breakage rate.
Selection Of Corrugated Sidewall Belt Conveyors In The Grain Industry
From the current situation in China, corrugated sidewall belt conveyors are widely used in the transportation of coal, cement, and chemical raw materials in coal mines. Compared with these materials, grains have special properties and requirements. When using corrugated sidewall belt conveyors, the following issues should be given due attention:
Output
To estimate the actual output, the filling coefficient should be considered. The larger the inclination angle, the smaller the filling coefficient. The calculation of the longitudinal cross-sectional area of the material accumulation between the two partitions directly affects the calculation result of output. The sliding condition of grains in actual operation is different from the theoretical predicted condition of the dynamic accumulation angle of grains.
Layout
The external structure and load distribution of corrugated sidewall belt conveyors are different from those of common grain transportation equipment. When conducting process design, it is necessary to request the manufacturer to provide relevant parameters. By taking advantage of the characteristic of corrugated sidewall belt conveyors that they can transport at large angles or even vertically, the user unit can carry out technical transformation and replace Bucket Elevators with them for grain transportation. At this time, it is necessary to fully consider the changes in the external structure. Taking a vertical transportation capacity of 50t/h as an example, the width of the bucket elevator's bucket belt is generally 0.3m, while the Base Belt width of corrugated sidewall belt conveyors should be selected to be 1m. Even for corrugated sidewall belt conveyors with auxiliary mechanisms, the Base Belt width should be selected to be 0.6m. The changes in support and load should be fully considered to ensure safe use.
Operation
Grain is a type of material that is small in size, loose in texture, and has good fluidity. It is susceptible to the effects of equipment instability such as belt vibration. Especially during vertical transportation, grain is more sensitive to the operating state of the belt and is prone to spillage. Additionally, due to the effect of centrifugal force, grain is also prone to rolling and jolting when passing through the arc section. Therefore, when purchasing equipment, manufacturers should be required to adjust relevant parameters and structures according to the material characteristics of grain to ensure smooth grain transportation.
Grain Return
After the grain flow is discharged from the first wheel, a small number of grains trapped in the wave-like folds cannot be completely discharged. They fall and spill during the return journey, with the spillage amount being approximately less than a few thousandths. This phenomenon cannot be completely eliminated. Measures such as sealing and collection should be adopted to avoid waste of grain and keep the ground clean.
I have been deeply involved in the Corrugated Sidewall Belt Conveyors field for many years. This equipment has already reached a mature level in technology, and the processing quality of domestic conveyor belts has also reached a relatively high level. After targeted adaptation and adjustment, it can play an important role in the grain industry. I always believe that when choosing conveying equipment for the grain industry, the core lies in adapting to the working conditions, controlling losses, and reducing costs, rather than blindly pursuing advanced and high-end equipment.
Although it is not a universal device, in the core scenarios of the grain industry where space is limited and the need to control the crushing rate is required, its advantages far exceed those of traditional equipment. It can precisely solve the problems of conveying, improve efficiency and reduce losses, and save costs. It also provides a new direction for the technical transformation of the industry.
If you have any questions about the selection and parameter adjustment in scenarios such as grain warehouses, processing, and ports, you can contact us at any time. We will provide you with professional and accurate suggestions based on our years of industry experience, helping you avoid misunderstandings and select the right equipment.





